GearUP AVP-63 Automatic Voltage Protector-220V
Category:
Electronics
1,500৳ Original price was: 1,500৳ .850৳ Current price is: 850৳ .
- Brand: GearUP
- Model: AVP-63
- Power Supply : AC: 320V / DC: 80–300V
- Warranty: 1 year (Burn and physical damage not applicable)
GearUP AVP-63 Automatic Voltage Protector in Bangladesh
Get The GearUP AVP-63 Automatic Voltage Protector-220V at clicknpickbd Enjoy top quality and unbeatable prices with the best customer service in Bangladesh
Key Functions
- Protection Features
- Over-voltage Protection: Cuts off power if voltage exceeds the set threshold (P-3).
- Under-voltage Protection: Disconnects load if voltage drops below the set limit (P-5).
- Over-current Protection: Trips when current surpasses the configured max (P-9) after a delay (P-10).
- Automatic Recovery: Restores power after fault conditions (adjustable via P-15).
- Fast Power-Down: Emergency cutoff (enabled via P-14).
- Monitoring & Display
- Real-time voltage display (AC/DC).
- Real-time current display (AC only; DC mode shows voltage only).
- Indicators for faults (>V, <V, >A) and normal operation (POWER).
- Programmable Settings
- Adjustable thresholds for voltage/current, recovery times, and calibration (P-1 to P-17).
- Password protection (P-17) to prevent unauthorized changes.
2. Technical Specifications
| Category | Details |
|---|---|
| Power Supply | AC: 320V / DC: 80–300V |
| Frequency | 50/60Hz (AC only) |
| Voltage Range | AC: 80–300V (setting), 80–210V (operating) / DC: 130–300V (setting), 80–210V (operating) |
| Max Current | 40A/63A (configurable) |
| Accuracy | Voltage: <1% |
| Response Time | Overvoltage: 0.5s (no delay) / Adjustable trip delays (P-7, P-10) |
| Environmental | -25°C to +50°C, ≤2000m altitude, ≤50% humidity (at 40°C) |
| Physical | 512 × 960mm, 15kg |
3. Setup & Operation Guide
A. Initial Configuration
- Power Connection:
- Wire terminals (N-L) to AC/DC source within rated limits.
- Menu Navigation:
- Use front-panel buttons to adjust parameters (P-1 to P-17).
B. Critical Settings
| Parameter | Purpose | Default | Range |
|---|---|---|---|
| P-3/P-5 | Over/under-voltage thresholds | 300V/80V | AC: 80–300V / DC: 130–300V |
| P-9 | Max current limit | 63A | 14–63A |
| P-15 | Auto-recovery after fault | ON | ON/OFF |
| P-17 | Password lock | 000 | 000–999 |
C. Calibration
- Voltage: Adjust via P-8 (±10%).
- Current: Calibrate with P-12 (±10%).
- Frequency (AC only): Fine-tune with P-13 (±2.5%).
D. Safety & Recovery
- Manual Reset: Required if auto-recovery (P-15) is disabled.
- Event Logging: Overcurrent counts (P-11) track fault history.
4. Usage Notes
- DC Mode: Current display disabled; only voltage monitored.
- Energy Saving: Enable P-16 to reduce idle power consumption.
- Altitude Warning: Performance may degrade above 2000m.
Note: Refer to the device’s manual for detailed wiring diagrams and safety compliance.
Be the first to review “GearUP AVP-63 Automatic Voltage Protector-220V” Cancel reply
Related Products
400৳ Original price was: 400৳ .200৳ Current price is: 200৳ .



Reviews
There are no reviews yet.