GearUP AVP-63 Automatic Voltage Protector-220V
Original price was: 1,200৳ .850৳ Current price is: 850৳ .
- Brand: GearUP
- Model: AVP-63
- Power Supply : AC: 320V / DC: 80–300V
- Warranty: 1 year (Burn and physical damage not applicable)
Availability: 250 in stock
GearUP AVP-63 Automatic Voltage Protector in Bangladesh
Get The GearUP AVP-63 Automatic Voltage Protector-220V at clicknpickbd.com Enjoy top quality and unbeatable prices with the best customer service in Bangladesh
Key Functions
- Protection Features
- Over-voltage Protection: Cuts off power if voltage exceeds the set threshold (P-3).
- Under-voltage Protection: Disconnects load if voltage drops below the set limit (P-5).
- Over-current Protection: Trips when current surpasses the configured max (P-9) after a delay (P-10).
- Automatic Recovery: Restores power after fault conditions (adjustable via P-15).
- Fast Power-Down: Emergency cutoff (enabled via P-14).
- Monitoring & Display
- Real-time voltage display (AC/DC).
- Real-time current display (AC only; DC mode shows voltage only).
- Indicators for faults (>V, <V, >A) and normal operation (POWER).
- Programmable Settings
- Adjustable thresholds for voltage/current, recovery times, and calibration (P-1 to P-17).
- Password protection (P-17) to prevent unauthorized changes
2. Technical Specifications
GearUP AVP-63 Automatic Voltage Protector in Bangladesh
Get The GearUP AVP-63 Automatic Voltage Protector-220V at DROPSHOP.COM.BD Enjoy top quality and unbeatable prices with the best customer service in Bangladesh
Key Functions
- Protection Features
- Over-voltage Protection: Cuts off power if voltage exceeds the set threshold (P-3).
- Under-voltage Protection: Disconnects load if voltage drops below the set limit (P-5).
- Over-current Protection: Trips when current surpasses the configured max (P-9) after a delay (P-10).
- Automatic Recovery: Restores power after fault conditions (adjustable via P-15).
- Fast Power-Down: Emergency cutoff (enabled via P-14).
- Monitoring & Display
- Real-time voltage display (AC/DC).
- Real-time current display (AC only; DC mode shows voltage only).
- Indicators for faults (>V, <V, >A) and normal operation (POWER).
- Programmable Settings
- Adjustable thresholds for voltage/current, recovery times, and calibration (P-1 to P-17).
- Password protection (P-17) to prevent unauthorized changes
2. Technical Specification
Category Details
Frequency: 50/60Hz (AC only)
Voltage Range AC: 80–300V (setting), 80–210V (operating) / DC: 130–300V (setting), 80–210V (operating)
Max Current: 40A/63A (configurable)
Accuracy Voltage: <1%
Response Time Overvoltage: 0.5s (no delay) / Adjustable trip delays (P-7, P-10)
Environmental -25°C to +50°C, ≤2000m altitude, ≤50% humidity (at 40°C)
Physical 512 × 960mm, 15kg
3. Setup & Operation Guide
A. Initial Configuration
- Power Connection:
- Wire terminals (N-L) to AC/DC source within rated limits.
- Menu Navigation:
- Use front-panel buttons to adjust parameters (P-1 to P-17).
B. Critical Settings
Parameter Purpose Default Range
P-3/P-5 Over/under-voltage thresholds 300V/80V AC: 80–300V / DC: 130–300V
P-9 Max current limit 63A 14–63A
P-15 Auto-recovery after fault ON ON/OFF
P-17 Password lock 000 000–999
C. Calibration
Voltage: Adjust via P-8 (±10%).
Current: Calibrate with P-12 (±10%).
Frequency (AC only): Fine-tune with P-13 (±2.5%).
D. Safety & Recovery
Manual Reset: Required if auto-recovery (P-15) is disabled.
Event Logging: Overcurrent counts (P-11) track fault history.
4. Usage Notes
DC Mode: Current display disabled; only voltage monitored.
Energy Saving: Enable P-16 to reduce idle power consumption.
Altitude Warning: Performance may degrade above 2000m.
Note: Refer to the device’s manual for detailed wiring diagrams and safety compliance.
Related Products
Original price was: 3,200৳ .2,600৳ Current price is: 2,600৳ .
Original price was: 1,700৳ .1,300৳ Current price is: 1,300৳ .
Original price was: 7,000৳ .5,500৳ Current price is: 5,500৳ .
Original price was: 9,000৳ .5,900৳ Current price is: 5,900৳ .
Reviews
There are no reviews yet.